Giantec GT-650, User Manual

Page: 22 / 111

User’s Manual
GT-650 BIOS Setup 4 - 7
Standard CMOS Selections
This table shows the selections that you can make on standard CMOS Menu
Item Options Description
Date Week,Month DD YYYY Set the system date. Note
that the ‘Day’ automatically
changes when you set the date
Time HH : MM : SS Set the system time
IDE
Primary Master
Options are in its sub menu
(described in Table 4-3)
Press <Enter> to enter the
sub menu of detailed options
IDE
Primary Slave
Options are in its sub menu
(described in Table 4-3)
Press <Enter> to enter the
sub menu of detailed options
IDE
Secondary Master
Options are in its sub menu
(described in Table 4-3)
Press <Enter> to enter the
sub menu of detailed options
IDE
Secondary Slave
Options are in its sub menu
(described in Table 4-3)
Press <Enter> to enter the
sub menu of detailed options
Drive A
Drive B None
360K, 5.25 in
1.2M, 5.25 in
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
Select the type of floppy
disk drive installed in your
system
Video EGA/VGA
CGA 40
CGA 80
MONO
Select the correct video
device
Halt On All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key
Select the situation in which
you want the BIOS to stop the
POST process and notify you
Base Memory N/A Displays the amount of
conventional memory
detected during boot up
Extended
Memory
N/A Displays the amount of
extended memory detected
during boot up
Total Memory N/A Displays the total memory
available in the system
Table 4-2 Standard CMOS Selections