30
氣壓側及阻尼側保養
Air
S
pring and Damper
S
ide
M
aintenance
1
分離上叉腳及下叉腳。註：請參考上下叉拆解章節
Disassemble upper and lower leg. Note: Refer upper/lower leg disassembl
y
section.
2
拆解氣壓室及阻尼側。請參考氣壓室與阻尼側拆解章節
Refer
to
air spring side and damper side disassembly
section
to disassemble air spring and
damper.
3
1
、清潔活塞組、螺絲、氣壓墊塊及氣壓內管。
2
、檢視
O-ring/X-ring
磨耗的情況，浸泡至
Mobil SHC 627
，必要時，請更換
O-ring/X-ring
。
請參考
O-ring/X-ring
指南
1.
Clean the piston set, nut, air spring token set
and inside of air chamber.
2.
Check the O-ring/X-ring
for
wear and tear. Soak the O-ring/X-ring in
Mobil SHC 627
Other oils may be used, please check with Giant ASQA for confirmation
.
Replace the O-
ring/X-ring
if necessary
.
For r
efer
ence, consult
the O-ring/X-ring indication
section
.
4
確認阻尼棒
Lockout
的功能或更換阻尼棒。註：請參閱更換阻尼棒章節
Check the damper lockout function
and
replace the damper cartridge
if necessary
. Note:
Refer
to
the damper cartridge replacement section
for directions
.
5
參考組裝流程組裝前叉。
Refer
to fork
assembl
y section to re-assemble
the fork.
