5
3
用
6
號六角板手拆下氣壓側及阻尼側底部螺
絲
Using a 6 mm hex, remove the bottom bolts of
the air spring and damper sides.
4
先把
LSC
調至
Open
的位置，將螺絲旋入
2~3
圈，使用膠槌敲打，分離下連桿與下叉腳
Open LSC (low speed compression) knob. Loosen the bolt two or three turns and use a plastic
mallet to gently tap it out.
5
取下螺絲，分離連桿及下叉腿
Remove the bolt and separate the connecting rod and lower leg.
Se
6
取出油泡棉，浸泡至
Mobil SHC 627
。
Remove sponges and soak in Mobil SHC 627.
Other
oils may be used
;
please check with Giant ASQA for confirmation. Never use alcohol to clean.
