You will now do the same “trimming” to the opposite end of excess edging, down by the
fin tabs. This procedure is slightly tricky as you must follow the fin tab “line”.
Take additional edging and apply in the same manner to the tips of all fins
MAKING SURE
THAT EXCESS EDGING EXTENDS PAST THE PREVIOUSLY MOUNTED LEADING
AND TRAILING EDGING.
When completed, trim and sand the excess edging in the same “line”
as the previous edging.
Now you can “flat sand” the faces of all the fins and edges
BEING CERTAIN NOT TO SAND
INTO THE COMPOSITE FIN MATERIALS.
It will be necessary to fill the cavities left on the
tip edging prior to shaping of the edging into airfoils.