25
Serial Port 0 Configuration
This option specifies the base I/O port address and Interrupt Request of serial Port 1. The Optimal
setting is [IO=3F8, IRQ=4].
Serial Port 1 Configuration
Please refer to Serial Port0 Configuration for this option. The Default setting is [IO=2F8,
IRQ=3].
Restore On Power Loss
The AC power Restore setting after power lost. The default setting is [Last State].
3.3.2 S5 RTC Wake Settings
Wake the system up from S5 by RTC alarm .The default setting is [Disabled].
Option
Description
Disabled
This value prevents you from configure the serial console
redirection
Fixed Time
The system will wake up the particular time
Dynamic Time
The system will wake up the current time + increases (1-5
points)
Summary of Contents for N21M-MV
Page 1: ...N21M MV...
