Giada N21M-MV, User Manual

Page: 7 / 46

6
Chapter 2 Hardware information
2.1:Installation Precautions
Before you change any settings on the motherboard, make sure to make all the precautions listed
below.

In dealing with the internal functions on the motherboard settings, you can unplug the
power cord of the computer;

To avoid static electricity, when you pick up any computer components, not only can use an
antistatic wrist strap, you can also touch a grounded object or a metal object (such as the
power supply housing) ect;

When handling the IC package, please try not to touch the chips on the module;

After you remove any integrated components,Please put it in the insulation pad to isolate
the static, or directly back into the component insulation bag to save;

Before you install or remove any component, make sure the ATX power switch is switched to
the off position,The safest approach is to unplug the power supply cord temporarily, and
then pick up again until the install / removal work is completed.This will avoid the power still
remains in the system to damage the motherboard, peripherals, components ect.
2.2:Motherboard Specifications
Size
Micro ATX 243.8x243.8mm
Solid-state capacitors
CPU Avoton Soc C2550 （ Compatible scalable design C2750 ）
BMC Aspeed AST1400
SIO Nuvoton NCT6791D
Memory 4*UDIMM/2ch DDR3/DDR3L ECC (64G max)
Expansion Slots
3*SATA3.0
4*SATA2.0
1*M-SATA
2*PCIE 2.0 4X
5*4pin FAN
1*20pin TPM 1.2
1*2*12pin ATX
1*9pin COM
1*4Pin USB2.0
Rear I/O
2*USB 2.0
1*VGA
2*PS/2
1*COM
4*RJ45 Gigabit Ethernet LAN ports
BIOS AMI UEFI Aptio V BIOS
OS Support Windows and Linux