28
Out-of-Band Mgmt Port
Option
Description
COM1
Use the COM1 port as EMS, default option;
COM2
Use the COM2 port as EMS.
Terminal Type
The option specifies console types in the serial port. There are four types standard, VT100,
VT100+, ANSI and VT-UTF8.
Option Description
VT100
ASCII Char set.
VT100+
Extends VT100 to support color function, etc.
ANSI
Extended ASCII char set.
VT-UTF8
Uses UTF8 encoding to map Unicode chars onto 1 or more.
Bits per Second
The option specifies serial port transmission speed. The speed must be matched on the other
side. Long or noisy lines may require lower speeds. Through this item you can select the baud
rate you want the serial port to use for console redirection.
Option
Description
115200
Selects serial port Baud rate as 115200.
57600
Selects serial port Baud rate as 57600.
19200
Selects serial port Baud rate as 19200.
9600
Selects serial port Baud rate as 9600.
Flow Control
The option specifies Flow Control. The optimal setting is none. The setup default is None.
Option
Description
None
Set this value to disable Flow control.
Hardware RTS/CTS
Select this value to make Flow control by Hardware.
Software Xon/Xoff
Select this value to make Flow control by Software.
3.3.4 Network Stack Configuration
Network Stack: Enable or disable UEFI Network Stack, Ipv4/Ipv6 PXE function enable or
disable, the default setting is [Disable].
Summary of Contents for N21M-MV
Page 1: ...N21M MV...