46
45
www.giadatech.com
Click the right upper part of the control interface—Advanced Setup for Device,
the interface shown in Fig. 4.12 will pop up. Then select “separate all input jacks
as independent input devices”.
Fig. 4.12
Click OK, and the controlling interface will turn to one shown in Fig. 4.13.
Fig. 4.13
Fig. 4.14
If a MIC is used, please select the corresponding front or rear mode and set the
device as default. In the above interface, you can adjust the volume for
recording and the playing volume for the MIC.
If you need to set the output of multi-channel, you should right click the mouse
at the corresponding output interface. A dialog box will pop up, as shown in Fig.
4.14.
