32
31
www.giadatech.com
Quiet Boot
To start the system quietly.
Add On ROM Display Mode [Force BIOS]
This item allows you to set the display mode of the device’s firmware
program. The options are [Force BIOS] and [Keep Current].
Bootup Num-Lock
(To set the state of Num Lock after start-up). Options are OFF and ON. In
other words, this item can be used for setting the state of Num Lock for the
time the system has been started. It can be set on the basis of the needs of
the user and doesn’t affect the performance of the computer.
PS2 Mouse Support
Set to support PS2 mouse. The available options are [Auto] and [Disable].
The default value is Auto.
Wait For“F1” If any Error
(The system waits the user to press F1 if any error occurs from the
computer). The options are Disable and Enable. Normally, it is set as Enable.
Then if the computer has any error, a line of English words will appear on the
screen, reminding the user of pressing F1 to enter CMOS for setup. If it is
set as Disable, that line of English words won’t appear. However, if the words
“wait…” appear during the start up process and you press Del, the system
can also enter CMOS for setup.
Hit “Del” Message Display
(Information is displayed when the computer is started, suggesting the user
can press “Del” to enter the state for CMOS setup). The options are [Disable]
and [Enable]. Normally, [Enable] is selected. After [Enable] is selected, the
information on how to enter the state for CMOS setup will be displayed at the
time the computer is started. If [Disable] is selected, such information won’t
be displayed. However, if you press “Del” when the character “Wait……”
appears at the time the computer is started, the system can also enter the
state for CMOS setup.
·
·
·
·
·
·
5. Security Setup
Fig 3.5
·
Interrupt 19 Capture [Disabled]
If you use some PCI extension cards with built-in firmware program (like
SCSI extension card) and you want to start the system through Interrupt 19,
you can set this item as [Enabled]. The options are [Disabled] and [Enabled].
·
Boot Device Priority
To set the booting priority.
·
Hard Disk Drives
To set the booting priority of hard disk devices.
·
Removable Drives
To set the booting priority of removable devices.
·
CD/DVD Drives
To set the booting priority of CD/DVD-ROM devices.
