• Water is removed from !he air and collected in !he tank .
• When !he tank is full, !he appliance shuts down and " F� " (full tank) appears on !he display.
The tank cap mus! be extracted and emptied. Run off all water left into a basin.
When all the water has been drained, put the cap back in place.
• When the tank has been emptied, the appliance starts up again.
N.B.- When operating in very cold rooms, !he appliance defreezes automatically, momentarily interrupting
normal operation. " L�" appears on !he display. During this operation, it is normal far !he noise made
by the appliance to change.
- In this mode, you may have to wait far a few minutes befare !he appliance starts giving out hot air.
- In this mode, !he fan may operate far short periods, even though !he set temperature has already
been reached.
"*" means only the heat pump model have this function.
�
FANMODE
When using the appliance in this mode, the air hose does not
need to be attached.
To set this mode correctly:
• Press the M button a number of times until the :: symbol
appears.
• Select the required fan speed by pressing the
c%i
button.
Three speeds are available:
Maximum speed:
for maximum fan power
Medium speed:
reduces noise levels but still
maintains a good level of comfort
Low speed: for silent operation
m
DRY MODE
Ideal to reduce room humidity (spring and autumn, damp rooms,
rainy periods, etc).
In dry mode, the appliance should be prepared in the same way
as for cool mode, with the air exhaust hose attached to enable
the moisture to be discharged outside.
To set this mode correctly:
• Press the M button a number of times until the dh symbol
appears.
• Select the required fan speed by pressing the
c%i
Three speeds are available:
button.
Maximum speed:
to achieve the best
dehumidify effect.
Medium speed:
can reduce noise level but still
maintances a better dehumidify effect.
Low speed:
far silent operation but weaken the
dehumidify effect relatively.
7
dh
•
-
..
•
Summary of Contents for Giatsu GIA-PC-09P15
Page 1: ......