GIA Giatsu GIA-PC-09P15, Owner'S Manual, Page: 10 / 19

111
Switch the unit of temperatura
When the appliance is standby, press the M button 20 seconds, then you can change the
unit of temperature.
For example:
Befare change, in cool mode, the screen display like fig1.
After change, in cool mode, the screen display like fig2.
�u·c
L I
*
SELF-DIAGNOSIS
Fig 1
•
-
..
Fig 2
•
-
..
The appliance has a self diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.
1 F IS DISPLAYED,
111
Low
TEMPERATURE
(frost prevention)
PROBE FAILURE
(sensor damaged)
111
FULL TANK
(safety tank full)
WHAT SHOULD I DO?
The appliance is fitted with
a frost protection device to
avoid excessive formation
of ice.
The appliance starts up
again automatically when
the defrosting process is
completad.
lf this is displayed, contact
your local authorised servi­
ce centre.
Empty the interna! safety tank,
following the instructions in the
"End of season operations"
paragraph.
8