TURNING THE APPLIANCE ON
Plug into the mains socket, then the appliance is standby.
Press the (.!) button to make the appliance turn on. The last function active when it was turned off
will appear .
.,/ Never turn the air conditioner off by unplugging from the mains. Always press the
button (!), then wait for a few minutes before unplugging. This allows the appliance
to perform a cycle of checks to verify operation.
=
COOL MODE
Ideal for hot muggy weather when you need to cooling and
dehumidify the room.
To set this mode correctly:
• Press the M button a number of times until the
*
symbol
appears.
• Select the target temperature18-32
º
C(64-90
º
F) by pressing
the /\ or V button until the corresponding value is displayed.
• Select the required fan speed by pressing the � button.
Three speeds are available:
Maximum speed:
to achieve the target tempe
rature as rapidly as possible
Medium speed:
reduces noise levels but still
maintains a good level of comfort
Low speed:
for silent operation
�u
L I
*
The most suitable temperature for the room during the summer varíes from 24
º
C to 27
°
C.
··
L
•
-
..
You are recommended, however, not to set a temperature much below the outdoor temperature.
The fan speed difference is more noticeable when the air conditioner is under fanning mode
but may not be noticeable under cooling mode.
13
HEAT MODE
*
• Press the M button a number of times until the �;; symbol
appears.
• Select the target temperature13-27
º
C(55-81
º
F) by pressing
the /\ or V button until the corresponding value is displayed.
• Select the required fan speed by pressing the � button.
Three speeds are available:
Maximum speed:
to achieve the target tempe
rature as rapidly as possible
Medium speed:
reduces noise levels but still
maintains a good level of comfort
Low speed:
for silent operation
6
,
,:
,
··-
L
'
�·#
•
-•-
-
#.�
..
Summary of Contents for Giatsu GIA-PC-09P15
Page 1: ......