23
Setup your PatchMate LOOP 8 Floor:
SETUP MODE:
To enter setup mode once you turn the power on you have 3 seconds to press the Store button once.
After the 3 second time out it will enter the SETUP MODE...... and the STORE LED will blink. You are
now in the MIDI CONFIGURATION PROGRAMMING MODE.
Note: If you do not press the store button within the first 3 seconds proceeding the initial power up, the
Patchmate Loop 8 will automatically enter normal mode and recall preset number 1.
1. The LEDs above the switches on the top panel will be displaying the current MIDI CHANNEL con-
figuration information. To modify the MIDI CHANNEL information press the desired button combina-
tion as shown on the MIDI CHANNEL SELECT diagram on the following page.
2. If you would like the PatchMate LOOP 8 Floor to respond to these program changes, press and re-
lease swtich 8. When the LED is "ON" the PatchMate LOOP 8 Floor will respond to controller changes.
Once you have made your selections PRESS and RELEASE the STORE Switch. All relays and LEDs
will blink twice indicating store success. (Now proceed to step 3 under MIDI CONTROLLER SETUP)
*You may PRESS CANCEL (Switch 6 ) on the top panel then press the STORE switch and release if no
changes are needed.
MIDI CONFIGURATION PROGRAMMING (DEFAULT)
Summary of Contents for Rocktron Patchmate Loop & Floor
Page 24: ...24 MIDI Channel Select ...
Page 31: ...31 ...
