E31.0.12.6C-06
Mounting and operating manual GIA 20 EB with electrically insulated supply
page 11 of 32
frequency range. In this case the input signal has to be treated like an active signal and you have
to configure the device as „TTL“.
When connecting the device You have to take care not to exceed the limits of the input
voltage respective the input current of the frequency-input.
Connection of a transducer with TTL or PNP output
Connection of a transducer with TTL or PNP output
(separate power supply)
(without separate power supply)
Connection of a transducer with NPN output
Connection of a transducer with NPN output
(separate power supply).
(without separate power supply).
Connection of a transducer with NPN output
Connection of a transducer with NPN output
and necessary external resistor
and necessary external resistor
(with separate power supply)
(without separate power supply).
Hint:
3k
Ω (with power supply voltage = 12V) or 7kΩ (with power supply voltage = 24V),
device configuration: Sens = TTL
Transducer
+Uv
Sig.
-Uv
+
_
Supply:
+
_
Supply:
for Transducer
3
4
7
9
+
_
Supply:
3
4
7
9
Transducer
+Uv
Sig.
-Uv
+
_
Supply:
+
_
Supply:
for Transducer
3
4
7
9
Transducer
+Uv
Sig.
-Uv
+
_
Supply:
3
4
7
9
Transducer
+Uv
Sig.
-Uv
+
_
Supply:
3
4
7
9
+
_
Supply:
for Transducer
Rv
Transducer
+Uv
Sig.
-Uv
+
_
Supply:
3
4
7
9
Rv
Transducer
+Uv
Sig.
-Uv
