GHM Messtechnik GmbH
●
Honsberg office
Tenter Weg 2-8
●
42897 Remscheid
●
Germany
Tel49 (0) 2191 9672-0
●
www.honsberg.com
4
5.2
Operation/maintenance
The devices operate with pure medium free of repairs. We recommend applying a filter for unclean
medium. With the device WR1 there is the additional possibility to clean the sight glass with an
internal wiper.
The technical information can be found in the product information. This is included with
the product or may be downloaded at http://www.ghm-messtechnik.de/en/products/b-
sensors-and-instrumentation/b2-flow/rotor-inline-model.html#c4558.
Filter TYPE ZV
Filter TYPE ZE
Storage
Please observe the storage temperature.
A desiccant or heating against the formation of condensation is recommended in moist areas.
Transport
Please observe the transportation temperature.
Prevent environmental influences such as impacts, blows, dust and vibrations.
The legal regulations for protecting the environment and our personnel require that returned
devices which have come into contact with toxic and hazardous materials can be treated
with no risks to personnel and the environment.
Should you return a device to us for evaluation, repair or disposal we ask that you strictly adhere to
the following regulation:
A return form can be downloaded on our homepage at:
http://www.ghm-messtechnik.de/en/downloads/ghm-forms.html.
Acceptance from GHM-Honsberg can only occur if
1. a filled-out form is provided with each return,
2. packing is applied that prevents damage to the device,
3. the device is cleaned so that no dangers are present,
4. the filled-out form and, if necessary (hazardous materials), a safety data sheet of the
measurement medium is applied to the outside of the packaging.
During disposal, a material separation and recycling of the device components as well as the
packaging must be observed. The legal stipulations and guidelines valid at this point in time must be
adhered to.
The device may not be disposed of in a residual waste bin. Should a disposal of the device take
place, send it directly to us with the return form filled out under point 9. We take over the appropriate
and professional disposal.
© GHM-Messtechnik GmbH, Remscheid
As of: 2014-09-04
2
More information on our accessories can be found in the product information.
3
See product information: ambient/transportation temperature
6
Technical information
7
Accessories
2
8
Device transportation and storage
3
9
Return
10 Disposal
11 Disclaimer
All rights reserved, including those pertaining to translation. No portion of this
operating manual may be reproduced, duplicated or distributed without
permission from the company GHM Messtechnik in Remscheid.
Changes reserved.
