background image

Electrical Tests

Isolation tests

Standards

IEC 255-5

Voltage test (all circuits without auxiliary supply)

2 kV (eff), 50 Hz

Voltage test (auxiliary supply)

2.8 kV-

Surge voltage (Type test)

5 kVpp; 1,2/50 us;0,5 J
3 positive and 3 negaitve surges within 5 sec.

EMC-Test,  interference resistance 

(Type test)

Standards

IEC 255-6; IEC 255-22; EN 50082-2

High frequency  test

2,5 kVpp; 1 MHz; t=15us;400 surges/sec

IEC 255-22-1, class III
VDE 0435 part 303, class III

Electrostatic discharge 

4 kV/6 kV contact discharge, 8kV air discharge

IEC 255-22-2, class III
IEC 1000-4-2, class III

Irradiation High frequency field, unmodulated

10 V/m; 27 MHz to 500 MHz

IEC 255-22-3, class III

Irradiation High frequency field, amplitude-modulated

10 V/m; 80 MHz to 1000 MHz; 80% AM; 1 kHz

IEC 1000-4-3, class III

Irradiation High frequency field, pulse-modulated

10 V/m; 900 MHz; repetition rate 200 Hz

IEC 1000-4-3, class III

Fast transient bursts

2 kV; 5/50 ns; 5 kHz; burst 15 ms

IEC 255-22-4

repetition rate 300 ms, both polarities

IEC 1000-4-4, class III

Ri = 50 Ohm; test-duration  1 min.

Conducted emission high frequency

10 V; 150 kHz to 80 MHz; 80 % AM; 1 kHz

IEC 1000-4-6, class III

Magnet field with energy-technical frequency

30 A/m; constantly; 300A during 3 sec.; 50 Hz

IEC 1000-4-8, class IV

0,5 mT; 50 Hz

IEC 255-6

   

___________________________________________________________________________________________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________

GHIELMETTI AG,

  Industriestrasse 6,  CH-4562 Biberist,  Schweiz  -  www.ghielmetti.ch  -  [email protected]  - 

 

T: +41 32 671 13 13   -

    

  F: +41 32 671 13 14

12/16

Summary of Contents for GKV 10x40 621 SK R K

















Reviews: