Introduction
Thank you for choosing a GHIELMETTI
product.
We are convinced that your choice will
prove to be a wise and worthy decision
for many years to come.
Your GHIELMETTI product has been
tested for performance at the factory
according to the specifications given for
the system in this manual. However,
before putting the device into operation
we kindly ask you to read this manual
and act according to the instructions gi-
ven. All information given in this docu-
ment is property of Ghielmetti AG. To
the
knowledge of Ghielmetti AG there are no
errors in the manual. Should any errors
be discovered, please notify us. Ghiel-
metti will under no circumstances accept
responsibility neither for errors in this
manual, nor consequences of such
errors.
Warranty
Ghielmetti warrants products for one
year from date of purchase against de-
fects in materials and workmanship.
During the warranty period, Ghielmetti
will, at its option, either repair or
replace products that prove to be
defective.
The warranty does not cover any defects
caused by accident, misuse, neglect,
improper or inadequate installation or
maintenance by buyer, buyer-supplied
software or interfacing, unauthorized
modification, operation outside of the
environmental specifications for the
product, or improper site preparation or
maintenance.
Safety Considerations
General
This product and related documentation
must be reviewed for familiarization with
safety markings and instructions before
operation. This product has been
designed and tested in accordance with
international standards.
STOP
Safety Earth Ground
This is a Safety Class 1 product (a
protective earth terminal is provided).
An uninterrupted safety earth ground
must be provided from the main power
source to the product input wiring
terminals, power cord, or supplied
power cord set.
Whenever it is likely that the protection
has been impaired, the product must be
made inoperative and secured against
any unintended operation.
Installation
Initial Inspections
Check the contents of the shipment for
completeness and possible transport
damage.
If the contents are incomplete or
damaged, contact Ghielmetti
immediately to get the concerned parts
repaired or
replaced.
Before Applying Power
Verify that the product is configured to
match the available main power source
per the input power configuration
instructions provided in this manual.
Servicing
Servicing, adjustments, maintenance or
repair of this product may be performed
by qualified personnel only.
__________________________________________________________________________________________________________________
GHIELMETTI AG,
Industriestrasse 6, CH-4562 Biberist, Schweiz - www.ghielmetti.ch - [email protected] -
T: +41 32 671 13 13 -
F: +41 32 671 13 14
___________________________________________________________________________________________________________________________________________________________________________________________________________
2/16
Summary of Contents for GKV 10x40 621 SK R K
Page 15: ......
