Ghibli 150S100, Use And Maintenance

Page: 65 / 256

Fig. 14
00001 . 5 xxxx
1
EN - 19
EN
6.1.e – Alarms during function
(Fig. 14)
In case of alarm while the machine is func-
tioning, the symbol
with an error code
will appear on the display.
Here is a list of the possibleerror codes:
- 1E03:
This code includes two kinds of error:
a) The buttons are not in the “ 0 ” position.
Turn the ignition key to the “
0
” position,
put all the buttons in the “ 0 ” position and
start the machine again.
b) The recovery water tank is full.
It indicates that the level of liquid in the
recovery water tank has reached the
level of the alarm sensor; the suction
unit deactivates. Move the machine to
the discharge water station and drain the
recovery water tank as indicated in the
concerning paragraph.
- 2F01:
The machine has been started while
pressing the accelerator pedal.
Start the machine again without pressing
the accelerator pedal.
- Battery flashing symbol:
Indicates that the batteries are complete-
ly drained; all operating functions will be
deactivated, leaving only the drive func-
tion enabled.
Bring the machine immediately to the bat-
tery charging station.
NOTE:
If other error codes are displayed, contact
the Authorized Assistance Service.