www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
EN
- 17
11.1 - DRAINING THE
RECOVERY WATER
(Fig. 14)
DANGER:
Before lifting the recovery water tank (11)
make sure it is empty.
At the end of the washing cycle or when the
recovery water tank (11) is full, it is necessary
to empty the tank by proceeding as follows:
N.B.:
To dispose of the recovery water, comply
with the standards in force in the country in
which the machine is used.
- Position the machine near to a drain out-
let.
- Disconnect the hose (15) from the sup-
port.
- Remove the cap (57) from the hose (15)
and drain all the water contained in the
tank.
N.B.:
The amount of water that comes out can be
modulated by pressing on the end of the tube
(15).
- Put the cap (57) back on the hose (15)
and reposition it on the relative support.
12.1 MAINTENANCE AND
CLEANING
WARNING:
For information and warnings related to
maintenance and cleaning operations
please follow what is indicated in the
“Safety warnings for floors washer-dryer”
annexed to this one.
OPERATIONS TO
PERFORM DAILY
12.1.a - Emptying and cleaning the
clean water tank (Fig. 15)
WARNING:
At the end of the washing operations, it is
compulsory to drain and clean the clean
water tank (13) to prevent deposits or
scaling.
After draining the recovery water tank, drain
the clean water tank (13) as follows:
- Position the machine over a drain outlet.
- Remove the hose (17) from the holding
hooks and lay it down on the drain outlet;
remove the cap (57) and drain all the wa-
ter contained in the tank.
- Wash the inside of the tank, leaving the
drain hose open and adding clean water
through the top opening.
- Once finished cleaning, lift the tube (17),
close it with its appropriate cap (57) and
position it within its appropriate lodgings.
12.1.b - Cleaning the recovery water
tank (Fig. 16)
WARNING:
At the end of the washing operations, it
is compulsory to clean the recovery wa-
ter tank to prevent deposits or scaling
and the proliferation of bacteria, odours
or mould.
DANGER:
Drain the recovery water tank (11) before
lifting it.
- Remove the cover (12).
- Lift the recovery water tank (11).
- Leaving the hose (15) lowered and the
cap off, add water through the upper
opening (58), cleaning the inside of the
tank until clean water comes out of the
00_Manu_RUNNER_1ed 10-2020 - 49029500.indb 17
00_Manu_RUNNER_1ed 10-2020 - 49029500.indb 17
16/10/2020 08:15:40
16/10/2020 08:15:40
