www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
EN
- 7
5.1.a - Charging the battery with an
external battery charger (Fig.
8)
- Move the machine near the battery
charging station.
- Remove the battery plug (26) from the
socket (5) of the machine’s electrical sys-
tem.
- Connect the battery plug (26) to the ex-
ternal battery charger’s outlet (37).
- Once the batteries have been charged,
reconnect the battery plug (26) to the
socket (5) of the machine’s electrical sys-
tem.
6.1 - MACHINE CONTROLS
6.1.a - Control panel (Fig. 9)
29) Ignition key
-
Turned in a clockwise direction to “
ON
” it
powers the circuits, enabling machine op-
eration.
-
Turned in an anti-clockwise direction
to “
OFF
” it disconnects power to the
circuits and can be removed.
30) Maximum speed adjustment
potentiometer
It is possible to adjust the maximum
speed from “0” to “6” km/h with the po-
tentiometer (30).
-
Turn the potentiometer (30) clockwise
to increase the speed, turn it anticlock-
wise to decrease the speed.
-
When the accelerator pedal is pressed
the speed will be proportionate to the
set maximum speed.
31) Movement direction selector
-
It prepares the working of the machine.
-
By shifting the selector forward “ ”
the machine moves forward; by shift-
ing the selector backward “ ” the ma-
chine moves backward and the reverse
acoustic signal is activated. When the
selector is in the “
0
” central position the
machine remains in neutral.
38) Display
-
See paragraph (“Display controls”).
39) Button not in use
40)
Suction activation button
-
The suction activation is enabled by
turning the key (29) to the “
ON
” posi-
tion.
-
Press the “
” button (40) to start
the suction, on the display the symbol
“
” will light up and, if the forward
motion is engaged or if the machine is
in neutral, the squeegee drops.
-
Press the (40) button again and the
“
” suction will stop and the squee-
gee lifts.
-
If the machine is still, the squeegee is
lowered and the key (29) is on “
ON
”
after a certain period of inactivity the
squeegee will automatically lift.
42)
Silent operation button
Pressing the button (42) “
” re-
duces the speed of the intake turbine,
which considerably reduces the ma-
chine noise; the symbol “
” appears
on the display with the function ena-
bled.
Pressing again button (42) “
”
turns off the function and the machine
will start to operate again in standard
mode; symbol “
” appears on the
display.
NOTE:
When turning off the aspiration turbine
with “silent operation” mode enabled,
the operation of the turbine will auto
-
matically switch to “standard operation”
mode for the entire shut-off delay time.
00_Manu_RUNNER_1ed 10-2020 - 49029500.indb 7
00_Manu_RUNNER_1ed 10-2020 - 49029500.indb 7
16/10/2020 08:14:36
16/10/2020 08:14:36