![background image](http://html1.mh-extra.com/html/gharieni/mlx-i3-dome/mlx-i3-dome_instruction-manual_2220190034.webp)
33
10.3 Inclination of the upper construction
The upper construction can be tilted,
this is only possible with the
MLX iDome
/ MLX i
3
(Cube) Dome Electric
.
In the upper construction, the button for adjusting the inclination is located on the
right-hand side, as seen from the head end to the left of the height adjustment
button
(only MLX iDome / MLX i
3
(Cube) Dome Electric)
,
s. fig. below.
E
INCLINATION
:
TOWARDS HEAD END
F
INCLINATION
:
TOWARDS FOOT END
For safety reasons, the inclination can only be adjusted while the arrow
button «
E
» or «
F
» is pressed.
When you release it, the movement stops immediately.
The adjustment of the inclination stops when the upper construction has reached
a horizontal position.
If you then want to tilt the upper construction in the other direction, you must
press the corresponding arrow button again and hold it down.
In this way, a
conscious
adjustment of the inclination is achieved.
The angle of inclination of the upper construction in both directions is
approx. 5°.