15
Figures similar: All following figures serve as examples only.
1.
To move the MLE from the special pallet, you must raise it by
8 - 10 cm first. Plug in the MLE to do this. Then press the
corresponding push button of the manual control panel which is
on one side on a suspension unit / (
button 1
, s. fig. in chapter
10.1 M
ANUAL CONTROL PANEL
).
2.
You must set the backrest in upright position before you use the special carrying
aids. To do this, press the corresponding push button of the manual control panel
(
button 3
, s. fig. in chapter 10.1 M
ANUAL CONTROL PANEL
).
3.
Then unplug the MLE again.
4.
Lift the lower casing (
A
) by hand (s. fig. below).
