G H A R I E N I b e d s
7
1 . 6
M a i n t e n a n c e a n d s a f e t y c h e c k
The mains lead to the mains socket must be checked for damage at regular
intervals and must be changed by our Customer Service Department (or an
electrician) if damage is found.
Notify our Customer Service Department in case of faulty operation or if an
unusual noise is heard.
IF THESE PROVISIONS ARE NOT OBSERVED, THERE IS A RISK OF YOUR
GUARANTEE BEING INVALIDATED AND ALL LIABILITY BEING WAIVED.
Regularly check the water cushions for leaks.
To avoid algae and contamination, the water must be replaced at least once
every 6 months and replaced by an anti-algae liquid (conditioner).
1 . 7
D i s p o s a l
These beds consist of metal, wood and plastic parts, electronic components and
electric cables. The individual materials must be disposed of in accordance with
the environmental and waste disposal regulations of the country of use.
If you have any queries as regards disposal, contact the local authorities
responsible for waste disposal, your dealer or:
Gharieni GmbH Tel.: +49 (0)2841/88300-163
[email protected] Fax: +49 (0)2841/88300-999
Service Hotline: +49 (0)2841/88300-40
1 . 8
D a n g e r d u e t o d r i v e s o v e r h e a t i n g
Do not use the adjusting motors for continuous periods of more than 2 minutes.
The maximum period of continuous activation of the adjusting motors = 2
minutes.
Minimum idle period after 2 minutes of activation = 18 minutes.
2 . 0
G e n e r a l
Product description:
The bed is intended to let customers sit or lie on it during a treatment. The bed
can be continuously adjusted using 4 x 24-volt electric motors.
Function characteristics of the bed:
Height adjustment: continuous, (electrical)
Backrest adjustment: continuous, (electrical)
Inclination/leg adjustment: continuous, (electrical)
Footrest adjustment: continuous, (electrical)
Headrest adjustment: continuous, (manual)
Armrests: continuous, (manual)
