GGMgastro EITC65, User And Operational Manual

Page: 13 / 24

12
Electric connection
Warnings for the electric connection

do not use electric or pneumatic screwdrivers on the device terminal board

if the device has been taken from a cold to hot place, humidity could condense inside;
wait about 1 hour before powering it

check that the power supply voltage, mains frequency and electric power fall within the
set limits

disconnect the device power supply before proceeding with any type of maintenance

position the power cables as far away as possible from the signal cables

for repairs and information regarding the device, contact the EVCO sales network
USER INTERFACE
Preliminary notes
Operating statuses:

“on” status (the device is powered and is on; utilities may be on

“stand-by” status (the device is powered but is switched off via software; utilities are off