GGMgastro EITC65, User And Operational Manual

Page: 12 / 24

11
Green Key: It provides energy to the device.
Yellow Key: The LED on the device allows the lights to be turned on.
Dixell Digital Thermostat: Electronic multi-purpose thermostat that
adjusts the temperature.
Your product's internal temperature is set in our factory so that you can keep and protect your
food stored in the appliance. You can check the internal temperature of the product from the
digital thermostat display on the control panel. You can also adjust the desired temperature
with this thermostat.
If you run your product at the factory set temperature, you will get the best results both in
terms of performance and energy consumption.
Run your product for at least 3 hours. This ensures homogeneous heat distribution
throughout the device.
The digital thermostat on the product is set in the factory and does not require adjustment.
You can change the digital thermostat as follows. Digital thermostats contain many
parameters. If you think there is a problem with the cooling of your device, please contact the
technical service.
To display and modify target set point; in programming mode it selects a
parameter or confirm an operation. By holding it pressed for 3 sec when max or
min temperature is displayed it will be erased.
(UP) To see the max stored temperature; in programming mode it browses the
parameter codes or increases the displayed value. By holding it pressed for 3s the
fast freezing cycle is started.
(DOWN) To see the min stored temperature; in programming mode it browses the
parameter codes or decreases the displayed value.
(ON/OFF) Switch ON and OFF the instrument
ELECTRIC CONNECTION