9-4 Parameter setting sequence
① Supply AC power
② Entering the parameter mode
③ Selection of a parameter
④ Entering the parameter data
⑤ Changing the parameter data
⑥ Finishing the parameter data
change and entering the operation mode
Press and hold
(2 seconds)
When you press and hold the dial (PUSH-SET) for 2
seconds, the changed value will be set and you will
enter the operation mode.
To enter operation mode after entering the parameter mode, press and hold the dial
(PUSH-SET) for 2 seconds.
When you rotate the dial, the data value will change.
Set the desired data value.
Press the dial (PUSH-SET) to enter the selected
parameter data
When you press the dial (PUSH-SET) after entering the
data, the parameter selection mode will be displayed.
Turn the dial and select the desired parameter(4 parameters)
Modes can be selectedin the order of
RATE(reduction gear ratio
) →
S-ON(acceleration time)
→
SOFF(deceleration time)
→
LOCK(locking)
Press and hold the dial (PUSH-SET) for 3 seconds to
enter the parameter mode.
The indication turns on. (Rotation speed)
10
