Gfp 865DH
February 2018
4
NOTE: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his
own expense.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
4.
General Safeguards
•
Keep hands, long hair, loose clothing, and articles such as neckties away from rollers to
avoid entanglement and entrapment. The rollers have pinch points that can trap body
parts or clothing and cause serious injury
•
Do not use the machines for purposes other than lamination and mounting, otherwise
damages to the machine or accidents may occur
•
Keep out of reach of children
•
Keep flammable and wet objects away from the machine.
•
Do not use flammable sprays or materials when cleaning the machine
•
Do not leave the machine unattended during operations.
•
Do not mount metal materials or other hard objects.
•
Do not put burrs, sharp blade or rigid materials in between the two rubber rollers.
•
Do not attempt to laminate items that exceed total recommended material thickness of the
unit.
•
Do not touch the rollers when they are hot or place foreign object inside the machine.
•
D
o not cut adhesive films directly on the surface of the rollers to avoid damaging the
rubber coating.
•
Shut down the machine after laminating to avoid misusing this machine by others.
•
Shut down the power before moving the machine
•
Note the locations of foot wheels while moving or operating this machine to avoid
injuries to your feet.
•
Disconnect from the power supply before repair or maintenance.
•
Disconnect from the power supply when the machine is not in use for a long
time
.
•
When the machine lies idle for a long period of time, raise the top rubber roller to avoid
the distortion of the rubber surface.
•
Do not cover the surface of the machine until the machine has completely cooled.
•
Perform only the routine maintenance procedures referred to in these instructions