GF-8 Xten Crane System Instruction Manual
Page: 40
Accessories for GF- 8 crane
Levelling leg
Monitor carrier
Push bar
Track wheel with brake
Mounting the accessories
Levelling Legs:
Crank the spindle up to give enough clearance to connect the levelling arm to the dovetail
connection on the base dolly. Ensure that the automatic locking pin inserts fully. When all
4 Levelling Legs are mounted the base can be levelled.
Monitor Carrier:
Insert the monitor carrier axle through the respective holes on the pivot section and secure
with the knurled locking knobs.
Push Bar:
Can be connected to either end on the base dolly by inserting the push bar stubs into the
respective holes on the base. Lock tightly with the locking knobs.
Track Wheels:
Connect to the track wheel bolts on the underside of the base. Ensure that the automatic
locking pin inserts fully. Mount the track wheels so that the track wheel brake on each of
the units as well as the automatic locking pin points towards the mounting column.
Notice:
When operating the crane with the
push bar
mounted on the dolly, pay attention that the
crane arm at no time collides with the push bar.
Always use the levelling legs to level the crane when on uneven surfaces.
