In order to be able to control the transmitters without
moving your own base, it is necessary to copy the
memory of the receiver into another receiver or a backup
memory card.
!
Transfer to another receiver
Connect the 2 receivers with the appropriate cable
(supplied in the operating kit - fig. 12). The main receiver
must be connected to a power supply and it will provide
voltage for the second one too
!
Transfer to a backup memory
Insert the backup memory into the receiver (see fig. 13)
the right way round.
GfA ELEKTROMATEN UK Ltd
Advice
When transferring, connect the cable before switching on the
power.
Pag. 18
Copy the memory of a receiver into another receiver or into a backup memory
Restore the data from another receiver or a backup memory
!
Transfer from another receiver
Connect the 2 receivers with the appropriate cable
(supplied with the operating kit - fig. 12). The main
receiver must be connected to a power supply and it will
provide voltage for the second one too.
!
Transfer from a backup memory
Insert the backup memory card into the receiver
(see fig. 13) the right way round
GfA ELEKTROMATEN UK Ltd
Advice
When transferring, connect the cable before switching on the
power
Transmitter
Master Nº 1
CHOICE MENU
Master Nº 1
up to the
chosen menu
MENU
COPY ?
COPY ON
DISPLAY?
COPY ON
RECEIVER ?
Transmitter
NO
YES
See.
“ENTRY INTO THE MAIN MENU”
Transmitter
Master Nº 1
CHOICE MENU
Master Nº 1
up to the
chosen menu
MENU
COPY ?
COPY ON
DISPLAY?
COPY FROM
RECEIVER ?
Transmitter
NO
YES
See.
“ENTRY INTO THE MAIN MENU”
