03 Fire Door Control Systems
19
Fire Control Panel 03 – Set Up
To Enter the FCP03 Set-Up Menus
Fig 10
The Message ‘ENGINEERS SETUP’ followed by ‘FASTSET 1’ will scroll across the display.
Press the ‘UP’ button to scroll through FASTSET 1 to 5. (See the Fast-set Tables and drawings
on pages 19 - 24)
N.B. Pressing ‘SELECT’ sets the FCP03 to the Fastset last displayed.
ONLY PRESS SELECT IF YOU ARE SURE THAT YOU WANT TO CHANGE THE FCP03
FUNCTIONS.
Press ‘Down’ to scroll back through Fastset 5 to 1. From Fastset 1 press ‘DOWN’ to ‘EDIT
DELAYS’. Press ‘SELECT’ to set or change the delay timers.
Press ‘DOWN’ from ‘EDIT DELAYS’ to display ‘EDIT ALL’. Press ‘SELECT’ gives access to all
the parameters for customised operations. (See Engineers Set Up Description of Functions
pages 25 – 31)
WARNING
FIRE
SHUTTER
CLOSING
SELECT
UP
DOWN
MAINS
FAULT
SET
Press the ‘SELECT’,
‘UP’ and ‘DOWN’
buttons all together and
hold until the FCP03
Internal Lamp Flashes.
(When all 3 buttons are
pressed the ‘Bar’ on the
display will flash quickly
in the centre position)
Summary of Contents for FCP03
Page 1: ...10 19 FCP03 Fire Control Panel 03 INSTRUCTIONS...
Page 2: ......
