10
Signet 9950 Conductivity Transmitter
ENTER
UP, DOWN keys
Scroll through Menu options or adjust values during editing
Press both together to exit a menu or escape without saving
RIGHT key
Select item or character to edit
ENTER key
Access menus
Save changes
All possible segments shown in this illustration. The instrument's software controls which segments are shown at any
particular time.
Operation
ENTER
4
00.00
99.99
00.00
99.99
CH1
9999.9
9999.9
9999.9
9999.9
CH2
UOM
UOM
UOM
UOM
Relay 1
Indicator LED
Relay 2
Indicator LED
Backlight Sensor
(do not block)
Bar Graph
Channel 1
display area
Menu Navigation Keys
Relay 3
Indicator LED
Relay 4
Indicator LED
Units of Measure
(GPM, pH, sec, %, etc.)
Numeric
Values
or labels
Bar Graph
Channel 2
display area
Numeric
Values
or labels
Units of Measure
(GPM, pH, sec, %, etc.)
Password Overview
The password is required to start editing. Once entered correctly, this password will not be needed for subsequent uses,
until the menu system is exited. The password will be required when the menu system is re-entered.
Your choice of password (STD or CODE) is selected in the Options Mode.
●
STD
The standard (STD) password is
▲
▲
▲
▼
, pressed in sequence. This password is designed to protect the 9950
from unintentional changes. It is best suited for systems where a group of people need to be able to change settings.
●
CODE
The CODE default setting is 0000, adjustable to any 4-digit numerical code up to 9999. Using a personal code
provides the maximum degree of security. This code can be modi
fi
ed in the Options mode.
