Instruction manual
Putting into operation
42
10
Putting into operation
10.1
Pressure test
Ensure that the test pressure does not exceed 1.1 times the max. set back
pressure.
10.2
Setting the working pressure
Remove the cap from the bonnet assembly (top part), see Fig. 2.
To do so, position the screw driver in the notch of the cap.
Fig. 2
Loosen the locking nut, see Fig. 3
Fig. 3
In order to increase the setpoint value: Tense the spring.
To do so, turn the spindle clockwise, see Fig. 4
Fig. 4
1 ½
turns
Summary of Contents for 582 High Purity
Page 2: ......
