background image

TS 5000 ISM EFS

About this document

About this document

These instructions describe the installation and commissioning of the GEZE TS 5000 ISM-EFS guide rail.

Product description

1.1 

The GEZE TS 5000 R-ISM-EFS is approved for installation on double-leaf fire and smoke protection doors. The 
system contains an electrically controlled overrunning device and an integrated closing sequence control. In case 
of power interruption, the overrunning device is switched off and the door closes automatically. If the fixed lead 
is opened, the moving leaf remains in its waiting position until the fixed leaf is closed and releases the moving 
leaf via the closing sequence control. 
When mounting at escape and panic doors use a attachment damper that guarantee an approach door angle of 
about 24° for the moving leaf.

Related documents

1.2 

Additional documents for the installation and connection of the system are supplied with every component. 
Please follow these instructions.

Key to symbols

Warning

In these instructions, warnings are used to warn against material damage and injuries.

Always read and observe these warnings.

 

X

Follow all instructions marked with the warning symbol and the word WARNING.

 

X

Warning 

symbol

Warning

Meaning

DANGER

Danger for people.

Non-observance can result in death or serious injuries.

      –

CAUTION

Information to prevent damage to property and to understand and optimise workflow.

Further symbols used in these instructions

Important information and technical notes are emphasised to illustrate the correct operation.

Symbol

Meaning

means “Important note“

means “Additional information”

 

 

X

Symbol for a user action. Here you have to take an action.

Observe the sequence if there are several action steps.

 

X

Product liability

According to the definition of manufacturer‘s liability for his products in the Product Liability Act, the informati-
on contained in this brochure are to be followed. Ignoring this information absolves the manufacturer from his 
liability.

Safety instructions

Installation, commissioning and repairs must be performed by a specialist.

 

à

Use only GEZE original parts for repair work.

 

à

Unauthorised modifications of the system excludes GEZE from the liability for any resulting damage.

 

à

When used in fire and smoke barriers, all local regulations should be observed. 

 

à

Please observe the document “Instructions for Installation, Commissioning, Operation and Maintenance of the 

 

à

GEZE Hold-Open Device FA GC“.

GB  2

Summary of Contents for TS 5000 ISM EFS

























Reviews: