Rod locking
4
Assembly of Slimdrive SL and Slimdrive SLT product families (without RC2 variants)
3.2 Tools and aids
Tool
Closer size
Tape measure
Marking pen
Torque spanner
Allen key
1.5 mm–6 mm
Open-ended spanner
8 mm, 10 mm, 13 mm, 15 mm
Side-cutting pliers
Plumb-bob
Crimping pliers for cables
Wire stripper
Multimeter
4
Assembly of Slimdrive SL and Slimdrive SLT product families (without RC2 variants)
WARNING!
Risk of crushing!
The door leaves are still unsecured and move easily.
X
Make sure that the door leaves are not moved accidentally or by unauthorised persons.
4.1 Pre-conditions
à
Drive is set up completely
à
Cover is removed
à
Door leaves are hung in the drive and aligned in all
directions
à
Hanger bolts are not fixed tight
à
Door leaves are separated from the toothed belt
à
Door leaves are in the open position
à
Track is milled out
à
Locking device (2) is in the unlocked position
(dead bolt (1) is retracted into the housing)
à
Manual locking device (3) is mounted in the floor
ÖW = opening width
There are three versions of the manual locking device:
à
Standard
à
Convenience
à
Continuous
