Rod locking
17
Aligning the height of the top and bottom parts of the locking bolt
7
Aligning the height of the top and bottom parts of the locking bolt
Requirement
à
Door leaves not connected with the toothed belt!
X
Pull the rubber door sealing profile (33) at the top
and bottom out of the side strip until the outer
lower (35) or upper hole (34) can be accessed.
X
Turn the locking bolt in the side strip so that the
setscrew of the rod coupling (37) can be loosened
through the hole (38) in the side strip (hexagon
socket 3 mm).
X
Move one door leaf carefully to the closed position.
While doing so introduce the head (36) of the locking
bolt at the top into the T-groove of the dead bolt and
fixate it in this position with the setscrew.
X
Adjust the height of the bottom part of the locking
bolt (10) so that it has approx. 10 mm space to the
manual locking device or to the continuous floor
guide in the unlocked state.
The rod must lock securely in the locking state.
X
Check the locking and unlocking functions by using the manual unlocking.
X
Press the door sealing profile at the top and bottom back into the side strip.
X
Repeat the steps as specified above for the second door leaf.
X
Connect both door leaves with the toothed belt.
