SECULOGIC TZ320
7
Installation and assembly
Hook in housing and secure with screws.
X
Fit the cover of the emergency button.
X
Test the unit’s function.
X
Replacing the lock cylinder
3.4
The lock cylinder must fulfil the following requirements:
Profile half-cylinder, 40 mm (30/10)
à
Eight-way adjustable
à
When the plant is in operation, set it into service
X
mode.
To do this, turn key to left for ten seconds.
à
Right LED lights up green.
à
Take housing off the wall bracket.
X
Unscrew key switch.
X
Release cap screw and remove the lock cylinder.
X
Replace the lock cylinder.
X
Fit a new lock cylinder and secure with cap screw.
X
Reassemble the door control unit in reverse order to
X
disassembly.
Test the unit’s function.
X
