GCVR800_Montageanleitung_20210318
7
Adressierung
Adressing
DIP
1
2
3
Adresse
on off off 1
off on off 2
on on off 3
off off on 4
on off on 5
off on on 6
on on on 7
Lesemodul anschließen und einbauen
Installation of the reader module
1.
Verdrahtete Federleiste am Lesemodul ein-
stecken.
2.
Lesemodul auf der Rückwand fixieren
(oben in die beiden Sicherungslaschen ein-
hängen).
3.
Lesemodul unten in Richtung Rückmodul drü-
cken, bis die Verriegelungen links und rechts
komplett einrasten.
4.
Nach dem erfolgreichen Einrastvorgang ggf.
Sicherungsschraube einschrauben.
1.
Plug the wired connector into the reader
module.
2.
Fix the front module on the rear panel and
hang it at the top in the two securing
brackets.
3.
Press the lower part of the front module to-
wards the rear panel until the locks on the left
and right are completely snapped in.
4.
Screw in the securing screw again if neces-
sary, after the lock is properly snapped in.
1
2
3
4