GEZE E 212, Wiring Diagram

Page: 14 / 28

Safety instructions E 212 R1 / E 212 R / E 212
GB 4
the information contained in this brochure and in the corresponding
mounting instructions of the product (product information and proper
use, misuse, product performance, product maintenance, obligations to
provide information and instructions) is to be observed. Failure to com-
ply releases the manufacturer from their statutory liability.
à
Only qualified personnel who are authorised by GEZE may carry out
mounting, function check and maintenance. GEZE shall not be liable
for injuries or damage resulting from unauthorised modification of the
equipment.
à
GEZE shall not be liable if devices from other manufacturers are used
with GEZE equipment. Use only original GEZE parts for repair and main-
tenance work as well.
2.2 General safety precautions
In accordance with Machine Directive 2006/42/EC, a risk assessment must
be performed and the system identified with the CE marking in accordance
with Appendix III of the EC Machine Directive before commissioning the
system.
X X
Observe the latest versions of guidelines, standards and country-specific
regulations, in particular:
à
BGV A1 "Accident-prevention regulations, General regulations"
à
BGV A3 "Electrical systems and equipment"
à ASR A1.6 "Windows, skylights, translucent walls“.
à VDE 0100, Part 600 "Erection of low-voltage systems Part 6 Tests".
à DIN EN 60335-1 "Safety of electrical devices for home use and similar
purposes - Part 1: General requirements"
à
DIN EN 60335-2-103 "Safety of electrical devices for home use and
similar purposes - Part 2-103: Special requirements for drives for gates,
doors and windows"
à
MLAR "Model Guideline for Line Systems"
If the risk assessment shows that the closing speed of approx. 9 mm/s
prescribed by the factor represents a special danger (e.g. for children),
further protective measures, e.g. switch with OFF default setting (push-
button / dead-man operation) must be taken. No protective measures
are necessary if the installation height of the window is ≥ 2.5 m above the
access level.
2.3 Installation notes
WARNING
Important instructions for safe installation.
Observe all the instructions. Incorrect installation can
result in serious injuries.
The drive has been designed for installation on windows
at a height of ≥ 2.5 m above the access level.