MOTOR OPERATOR
Motor operators for MCCBs up 1000A
Round Peg
Square Peg
Motor operators for 125A and 250A frame are mounted on the front of the breaker. They can be rapidly fitted by locating the round pegs and square pegs on
the motor into corresponding round and square holes on the breaker. It takes less than 10 seconds to secure the motor to the MCCB. Two levers securely lock
the motor into position. No tools are needed to fit the motor operator.
400A frame to 1000A frame motor operators are held in place with mounting screws. They can be installed easily in the field.
Motor Operator for 125A and 250A frame MCCB’s
Motor Operator for 400A/630A and 1000A Frame MCCB’s
Voltage
presence
ON / OFF
TRIPPED
Indicator
Operating
Handle
Optional
key lock
Padlocking
facility
Manual charging
lever
Spring status
Manual
Charging
Point
ON / OFF+
TRIPPED
indicator
Optional
key lock
Select Lever
ON / OFF
push buttons
Motor Operator for 125A and 250A Frame MCCB’s
Motor Operator for 400A/630A and 1000A Frame MCCB’s
Motor operators provide the possibility of opening and closing an MCCB on application of electrical control signals.
Motor operators are extremely reliable, having been designed to endure the same switching duty as the host MCCB.
• Easy field-installation.
• Fast operation ( 100ms).
• Positive contact indication.
• Padlocking facility as standard (Maximum 3, hasp diameter 8mm).
• Versions available with automatic reset function.
• Voltage presence indication.
Mounting
screws
MSX
55
Informazioni Tecniche
Versione 2.0
Per informazioni tecniche contattate il SAT o visitate il sito gewiss.com
MCCB WITH THERMAL-MAGNETIC, ELECTRONIC, RESIDUAL CURRENT PROTECTION
AND SWITCH-DISCONNECTORS
MSX - MSXD - MSXE - MSXM
