background image

6

Bullet Ice Maker

HOW TO USE

Do clean the ice maker periodically, ex. once a month, to obtain fresh ice and help 
the machine last longer.
The incline angle should not exceed 45° during transport. Turning upside down 
is strictly forbidden. Doing so can cause damage to compressor or refrigerating 
system. After the jolt of transport, wait for 2 hours before plugging in.
If the ice maker is not to be used for some time, empty the water reservoir, dry it 
for storage.
The ice maker is designed to work quietly but will make some noise during operation.

When the machine stops ice making triggered by ‘Ice Full’ , it will not go back to 
ice making unless the ice is removed or melted.

Although heat insulation layer is used for unit housing, it only helps in slowing 
down ice melting speed. Transfer ice to freezer if you wish to keep it for long.

·

·

·

·

·

·

CUSTOMER SUPPORT

Gevi Official Website

Have a question or need assistance with your appliances? Visit Gevi Official 
Website any time any where. You can also get more information about Gevi and 
shop for more Gevi appliances. 

www.gevi-tech.com

Gevi Official Hotline

Wish to speak with someone? Call 

855-9922-888

 during normal business hours.

Gevi Official Email

To describe your issue in detail, write to us at 

[email protected]

 

Notes for Daily Use

Summary of Contents for GIMB-2104















Reviews: