Plug in the power cord, press down the power switch to
“I” position (the knob is on the“ ” position) , the coffee
switch light will flash blue, and the default setting is
brewing espresso.
(If you had operated the machine just
now,skip this step)
Press the steam switch, it will flash in white.Please wait
until the steam switch light stop flashing. Never skip to the
step 4 before the light stop flashing.
TIPS:
For better taste, we suggest to release the water in
the boiler before frothing milk. When the “ ” indicator
becomes green, place a cup under the froth nozzle, then
turn on the knob to the steam icon. Wait about a few
seconds, there will be water coming out from the nozzle.
Be careful of the hot steam. Then pour away the water of
the cup.
Prepare a pitcher with about 100ml of milk.Fill the pitcher
with milk and insert the frothing nozzle into milk about
1-2cm. Turn the knob to the far side“ ” , steam will come
out from froth nozzle.
Froth milk in the way moving vessel round from up to
down,after the milk increase in volume by 2 times or the
required purpose is reached, turn the knob back to the
“ ” position to stop. Take away the pitcher.
2.
3.
4.
5.
NOTE:
During the milk frothing, if there is suddenly a noise
and the steam become weak, please check whether the
water in the water tank is enough. If the water is going to
finished in the water tank, it will make a louder noise.
Please add water in time.
TIPS For How to Continue Frothing:
1: When you have frothed milk about 1-2 times. You can
wait until the steam switch light stop flashing, then
continue to froth milk.
2: When you have frothed milk for more than 3-4 times,
the steam will become weaker and you need to pump the
water into the boiler. Firstly, turn on the knob to " ",wait
for the water coming out from the outlet. The machine
will begin to pump water. Secondly, turn the knob to " "
to stop. Now you can froth milk again from step 3.
