background image

Waiting for a moment,  the espresso will flow out.Once 
desired  amount  of  espresso  is  reached,  turn  the  knob 
back to the middle "        " position to stop brewing.( To 
achieve a full flavor, each cup of espresso should be not 
more than 30ml .) 

NOTE:

1.  During  operation,  if  the  espresso  is  dripping  out  and 
doesn’t flow smoothly. Please check if the water is not 
enough  and  add  water  in  time.  If  not,  please  check 
whether the coffee powder is tamped too firmly, which 
will also cause the espresso flow unsmoothly and comes 
out a little volume.
2. The portafilter should be removed after a while as the 
machine  need  to  relieve  the  pressure.  Otherwise,the 
steam  will  splash  out  because  of  the  strong 
pressure.Please remove in parallel. 
3.  Because  high  pressure,  the  water  will  fully  penetrate 
into  the  coffee  powder,  it  takes  time  for  water  to  pass 
through and flow out of the coffee powder. So it is normal 
that the excess coffee will drip off.

7.

After making the espresso through the steps above(USE 
GUIDE 3), you can continue to froth milk, please refer to 
the following steps.
Press the steam switch, it will flash in white.Please wait 
until the steam switch light stop flashing. Never skip to the 
step 3 before the light stop flashing.

TIPS:

For better taste, we suggest to release the water in 

the boiler before frothing milk. When the “         ” indicator 
becomes green, place a cup under the froth nozzle, then 
turn  on  the  knob  to  the  steam  icon.  Wait  about  a  few 
seconds, there will be water coming out from the nozzle. 
Be careful of the hot steam. Then pour away the water of 
the cup.
Prepare a pitcher with about 100ml of milk.Fill the pitcher 
with milk and insert the frothing nozzle into milk about 
1-2cm. Turn the knob to the far side“        ” , steam will come 
out from froth nozzle. 
Froth  milk  in  the  way  moving  vessel  round  from  up  to 
down,after the milk increase in volume by 2 times or the 
required purpose is reached, turn the knob back to the
 “        ” position to stop. Take away the pitcher. 

1.

2.

3.

4.

USE GUIDE 4: 
FROTH MILK AFTER MAKING ESPRESSO
 (FOR CAPPUCCINO)

Summary of Contents for GECME003D-U














Reviews: