Getinge ISOTEST, User Manual

Page: 9 / 74

GETINGE-LA CALHENE ISOTEST | User manual
NTA 3015/78 C Approuvé informatiquement / Electronic signature DEX | Page
9
/
74
3.2. GENERAL
WARNING
This equipment uses hydrogen peroxide, electricity and
compressed air.
Failure to observe the recommendations and instructions
included in this manual may result in serious injury or
considerable material damage. Only qualified personnel
completely familiarised with all the safety rules and the
installation, operation and maintenance procedures set forth in
the various manuals is authorised to work on this equipment.
The correct and safe operation of this equipment requires
installation, use and maintenance in accordance with good
engineering practices.
CAUTION
This equipment should only be used for the purposes indicated
by its manufacturer. Unauthorised modifications and the use of
spare parts and accessories that are not sold or recommended
by the equipment manufacturer may result in fires, electric
shocks and injuries.
IMPORTANT
This manual must be kept within reach nearby the equipment,
and a copy must be sent to every user. All measurement and
testing operations to be performed on the live equipment must
comply with the applicable work safety regulations in the
country in question. It is advisable to use suitable tools. Before
installation and commissioning, please take the time to read the
safety instructions and the warnings included in this manual, as
well as all the warning labels affixed to the equipment. Please
make sure that these warning labels are always readable and
replace any missing or damaged labels.
Qualified personnel
In this manual, "qualified person" refers to a person who is
familiar with the installation, assembly, starting-up and use of
the equipment, as well as with the risks incurred.
Use of the
equipment
according to its
destination
The equipment should only be used for the applications
specified in the manual, with devices and components
recommended and approved by Getinge-La Calhène