Getac V110 Page 40 User Manual Download

Page: 40 / 118

Click



Settings



Devices



Select the device you want to connect from the search results.

Depending on the type of BT device that you want to connect to, you
will need to enter the pertinent information.

For detailed information on using the BT feature, see Windows’ online Help

Using the WWAN Feature (Optional)

A WWAN (Wireless Wide Area Network) uses mobile telecommunication
cellular network technologies to transfer data. The WWAN module of your
computer supports 3G and 4G LTE.

NOTE:

Your model only supports data transmission. Voice transmission is not

supported.

Installing a SIM Card

Turn off the computer and disconnect the AC adapter.

Carefully place the computer upside down.

Remove the 8 screws to open the compartment cover.

Locate the SIM card holder.

Summary of Contents for V110























































































































Search results

Summary of Contents for V110

Reviews:

Related manuals for V110

Brands by name

Popular brands

Getac V110, User Manual

Search results

Summary of Contents for V110

Reviews:

Related manuals for V110

Brands by name

Popular brands