manualshive.com logo in svg

Getac M220, Operation Manual

Share
Download
Getac M220 Operation Manual Download Page 71

 

3-2 Managing 

Power 

AC Adapter 

CAUTION: 

z

 

The AC adapter is designed for use with your computer only. Connecting the AC 

adapter to another device can damage the adapter. 

z

 

The AC power cord supplied with your computer is for use in the country where you 
purchased your computer. If you plan to go overseas with the computer, consult 

your dealer for the appropriate power cord. 

z

 

When you disconnect the AC adapter, disconnect from the electrical outlet first and 

then from the computer. A reverse procedure may damage the AC adapter or 

computer. 

z

 

When unplugging the connector, always hold the plug head. Never pull on the cord. 

 

The AC adapter serves as a converter from AC (Alternating Current) to 
DC (Direct Current) power because your computer runs on DC power, 
but an electrical outlet usually provides AC power. It also charges the 
battery pack when connected to AC power. 

The AC adapter operates on any voltage in the range of 100 ~ 240 V AC. 

Summary of Contents for M220






























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands