To check GESTRA RHOMBUSline steam traps use the two contact points provided at the
edge of the name plate on the cover. Gently press the tip of the measuring transducer
perpendicular to the surface into the respective dimple.
Test
continued
Checking Steam Traps
Important
If steam traps of the same type are tested take care that the tip of the measuring
transducer is always applied at the same point of the trap body in order to be able
to compare the results obtained and also to discover changes when repeating the
test.
We hereby declare that the equipment VKP 30 conforms to the following European guidelines:
n
LV guideline 73/23/EWG version 93/68/EWG
n
EMC guideline 89/336/EWG version 93/68/EWG
which are based on the following harmonised standards:
n
LV standard EN 60947-5-1: 1991
n
EMC standard EN 50 081-2, EN 50 082-2
This declaration is no longer valid if modifications are made to the equipment without consultation
with us.
Bremen, 1
st
January 2000
GESTRA GmbH
Dipl.-Ing. Uwe Bledschun
Dr. Anno Krautwald
Declaration of Conformity
Annex
12
