Connecting and Commissioning the Terminal
Connecting the Terminal to a PC
Plug the power supply unit into the adaptor VKPA 30, and then into an earthed mains socket.
The red and green LEDs of the adaptor are illuminated (green = power on, red = charging).
Connect the adaptor cable of the VKPA 30 to the terminal VKPN 30.
Use the supplied serial cable to connect the adaptor to the PC. Then choose the selected PC
port (COM 1 or COM 2) in the TRAPtest on-screen menu EXTRAS/ Interface and confirm your
entry.
Connecting the Measuring Transducer to a PC
To connect the measuring transducer VKPS 30 to the terminal, plug the connecting cable of the
measuring transducer into the right jack of the terminal VKPN 30.
Commissioning the Terminal
To start the terminal VKPN 30, press the START key for approx. 5 seconds.
The dialogue box “load VKP 30” pops up and then the front page of the TRAPtest program appears.
Press the ENTER key to call up the main menu on the terminal.
9
