Gestetner AO70 Copy Manual Download Page 19

Page: 19 / 94

Preset Stamp

Preset Stamp

The optional stamp board and HDD are required to use this function.

Prints a user stamp that has already
been stored.

Preparation

The stamp types are as follows.

You can change the position and
direction of the stamp.
You can use this function with
Background Numbering and Date
Stamp.

❖

Place your originals, and then
specify the user stamp position
and direction.

Limitation

❒

You cannot use the bypass tray.

❒

You can only use one type of
stamp at a time.

❒

You can print on paper sizes up to
A0 (E).

Note

❒

You can change the size, density
and print position of the stamp.

❒

You can change the default print
position for the stamp. See p.135
“Preset Stamp Format Priority”

ZEDG200E

ZEDG201E

Feed

Direction

Feed

Direction

Horizon

Vertical

DolphinGB-Copy-F_V4_FM.book Page 89 Monday, June 11, 2001 5:02 PM

Summary of Contents for AO70































































































Search results

Summary of Contents for AO70

Reviews:

Related manuals for AO70

Brands by name

Popular brands

Gestetner AO70, Copy Manual

Search results

Summary of Contents for AO70

Reviews:

Related manuals for AO70

Brands by name

Popular brands