Gestetner 3180DNP, Operating Instructions Manual

Page: 47 / 134

41
3. Printing Functions
Printing Functions
Master making Density
You can adjust the image density to
suit your needs.
Note
❒
You can specify the image density
that is selected by default when the
power is turned on. See “Master
Making Density” on p.106 “4 Ini-
tial Settings”.
A
Press the
{
Master Making Density
}
key to select the density you want
to set.
Note
❒
If your original has a colored
background such as red or blue,
select a lighter image density to
prevent the prints from appear-
ing dirty.
B
Make sure the
{
Master Making
}
mode
select key is lit.
Note
❒
If it is not lit, press the
{
Master
Making
}
mode select key.
C
Press the
{
Start
}
key.
D
Press the
{
Proof
}
key to check the
print image density.
ANT143S
ANT128S
ANT123S
C2678608_Platinum-EN.book Page 41 Sunday, February 12, 2006 10:53 PM