manualshive.com logo in svg

Gestetner 3180DNP, Operating Instructions Manual

Share
Download
Gestetner 3180DNP Operating Instructions Manual Download Page 13

7

R

 

CAUTION:

 

•

After you move the machine, use the caster fixture to fix it in place. Other-
wise the machine might move or come down to cause an injury.

•

If you use the machine in a confined space, make sure there is a continuous 
air turnover.

•

Keep the machine away from humidity and dust. Otherwise a fire or an elec-
tric shock might occur.

•

Protect the machine from dampness or wet weather, such as rain and snow.

•

Do not place the machine on an unstable or tilted surface. If it topples over, 
an injury might occur.

•

Unplug the power cord from the wall outlet before you move the machine. 
While moving the machine, you should take care that the power cord will not 
be damaged under the machine.

•

When you disconnect the power plug from the wall outlet, always pull the 
plug (not the cable).

•

Do not allow paper clips, staples, or other small metallic objects to fall inside 
the machine.

•

For environmental reasons, do not dispose of the machine or expended 
supply waste at household waste collection points. Disposal can take place 
at an authorized dealer.

•

When disposing of a used ink container, reattach the cap to prevent ink from 
splattering.

•

Be careful not to get ink on your clothes when replacing an ink container. Ink 
stains on clothes are hard to remove.

•

Be careful not to cut yourself on any sharp edges when you reach inside the 
machine to remove misfed sheets of paper or masters.

•

If ink comes into contact with your eyes, rinse immediately in running water. 
For other symptoms, consult a doctor.

•

Keep the ink or ink container out of reach of children.

•

If ink is ingested, induce vomiting by drinking a strong saline solution. Con-
sult a doctor immediately.

•

If your skin comes into contact with ink, wash the affected area thoroughly 
with soap and water.

•

While printing, do not touch the belt at the end of the paper delivery tray or 
the job separator. Otherwise, an injury might occur.

•

Our products are engineered to meet the high standards of quality and func-
tionality, and we recommend that you only use the expendable supplies 
available at an authorized dealer.

C2678608_Platinum-EN.book  Page 7  Sunday, February 12, 2006  10:53 PM

Summary of Contents for 3180DNP







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands